|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Agilent HSMX-C660 Right Angle Surface Mount Chip LEDs Data Sheet Features * Right Angle Mounting * Compatible with IR Reflow Soldering Process * Available in a Wide Variety of Colors * Available in 8 mm Tape on 178 mm (7") Diameter Reels Description The HSMX-C660 series of chip-type LEDs are designed to illuminate at a right angle to the direction of mounting. When mounted on a PC board, these devices will emit light in a direction parallel to the board. The small 3.0 x 2.0 mm footprint of the HSMX-C660 is designed for applications where space is limited. These devices are available in five colors and use untinted, nondiffused optics. The HSMX-C660 series of parts are compatible with IR reflow soldering process only. Package Dimensions CATHODE 3.0 ANODE Applications * LCD Backlighting * Keypad Side/Backlighting * Light Piping * Right Angle Indicator 1.0 0.3 0.3 2.0 2.0 1.0 0.25 0.88 CATHODE 0.25 ANODE POLARITY MARK R 0.45 TO REINFORCE SOLDERING (NON-PIN CONNECTION) Footprint (mm) 3.0 x 2.0 x 1.0 Parts per Reel 3000 DH AS AlGaAs HSMH-C660 High Efficiency Red HSMS-C660 Orange HSMD-C660 Yellow HSMY-C660 Green HSMG-C660 Absolute Maximum Ratings at TA = 25C Parameter DC Forward Current[1] HSMX-C660 25 65 5 -30 to +85 -40 to +100 Units mA mW V C C Power Dissipation Reverse Voltage (IR = 100 A) Operating Temperature Range Storage Temperature Range[2] Notes: 1. Derate linearly as shown on Figure 4. 2. Maximum temperature for the tape and reel packaging is 60C. Optical Characteristics at TA = 25C Luminous Intensity Iv (mcd) @ IF = 20 mA Min. Typ. 6.3 16.0 Peak Wavelength peak (nm) Typ. 650 Color Dominant Wavelength d[1] (nm) Typ. 639 Viewing Angle 21/2 (degrees)[2] Typ. 155 Luminous Efficacy v (lm/W) 80 Part No. HSMH-C660 HSMS-C660 Color DH AlGaAs Red High Efficiency Red Orange Yellow Green 1.6 1.6 1.6 4.0 5.0 5.0 5.0 9.0 639 606 589 570 626 604 586 572 155 155 155 155 145 380 500 595 HSMD-C660 HSMY-C660 HSMG-C660 Notes: 1. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 2. 1/ 2 is the off-axis angle where the luminous intensity is 1/ 2 the peak intensity. Electrical Characteristics at TA = 25C Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. 1.8 2.2 Reverse Breakdown VR (Volts) @ IR = 100 A Min. 5 Capacitance C (pF) VF = 0, f = 1 MHz Typ. 4.5 Thermal Resistance RJ-PIN (C/W) 300 Part No. HSMH-C660 HSMS-C660 Color DH AlGaAs Red High Efficiency Red Orange Yellow Green 1.9 2.0 2.1 2.2 2.6 2.6 2.6 2.6 5 5 5 5 4.0 4.0 3.0 8.0 300 300 300 300 HSMD-C660 HSMY-C660 HSMG-C660 2 Color Bin Limits [1] Green Color Bins [1] Dom. Wavelength [nm] MIN. MAX. 561 565 564 568 567 571 570 574 573 577 Orange Color Bins[1] Dom. Wavelength [nm] MIN. MAX. 596.0 601.0 599.0 604.0 602.0 607.0 605.0 610.0 608.0 613.0 611.0 616.0 Yellow/Amber Color Bins[1] Dom. Wavelength [nm] MIN. MAX. 581.5 585.0 584.0 587.5 586.5 590.0 589.0 592.5 591.5 595.0 594.0 597.5 Bin ID A B C D E Bin ID A B C D E F Bin ID A B C D H J Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representative for information on currently available bins. For HSMC, HSMH, HSMS, HSMZ (Red Color) No color binning available. Light Intensity (Iv) Bin Limits[1] Bin ID A B C D E F G H J K L M N P Q R S T Intensity (mcd) min. max. 0.10 0.20 0.16 0.32 0.25 0.50 0.40 0.80 0.63 1.25 1.00 2.00 1.60 3.20 2.50 5.00 4.00 8.00 6.30 12.50 10.00 20.00 16.00 32.00 25.00 50.00 40.00 80.00 63.00 125.00 100.00 200.00 160.00 320.00 250.00 500.00 Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representative for information on currently available bins. 3 1.0 GREEN ORANGE AlGaAs RED RELATIVE INTENSITY HIGH EFFICIENCY RED 0.5 YELLOW 0 500 550 600 650 700 750 WAVELENGTH - nm Figure 1. Relative Intensity vs. Wavelength. 30 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) IE - FORWARD CURRENT - mA 25 20 15 10 5 0 YELLOW ORANGE AlGaAs RED HER GREEN 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 IF - FORWARD CURRENT - mA 30 25 20 15 10 5 0 1.0 1.5 2.0 2.5 3.0 0 20 40 60 80 100 VF - FORWARD VOLTAGE - V IDC - DC FORWARD CURRENT - mA TA - AMBIENT TEMPERATURE - C Figure 2. Forward Current vs. Forward Voltage. Figure 3. Relative Luminous Intensity vs. DC Forward Current. Figure 4. Maximum DC Current vs. Ambient Temperature. 20 30 40 50 10 0 1.0 0.8 NORMALIZED INTENSITY 0.6 60 70 80 90 0.4 0.2 10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT - DEGREES Figure 5. HSMX-C660 Intensity vs. Angle, Vertical Axis. 4 10 SEC. MAX. 235C MAX. TEMPERATURE PRE-HEAT 125-145C 90 SEC. MAX. ABOVE 183C 3C/SEC. MAX. TIME 3C/SEC. MAX. Figure 6. Recommended Reflow Soldering Profile. 0.9 0.2 5.0 2.0 0.9 RWS CENTER 1.5 HSMX-C660 SERIES USER FEED DIRECTION EMITTED DIRECTION CATHODE SIDE MOUNTING EXAMPLE FOR HSMX-C660 SERIES PRINTED LABEL Figure 7. Recommended Solder Patterns. Figure 8. Reeling Orientation for the HSMX-C660. 5 8.0 1.0 (0.315 0.039) 10.50 1.0 (0.413 0.039) O 20.20 MIN. (O 0.795 MIN.) O 13.1 0.5 (O 0.516 0.020) 3.0 0.5 (0.118 0.020) 178.40 1.00 (7.024 0.039) 59.60 1.00 (2.346 0.039) 4.0 0.5 (0.157 0.020) 6 PS 5.0 0.5 (0.197 0.020) Figure 9. Reel Dimensions. 4.00 0.10 (0.157 0.004) O 1.50 + 0.10 0 (0.059 + 0.004) 0 1.20 CATHODE 0.20 1.75 0.10 (0.069 0.004) 3.50 0.05 (0.138 0.002) DIM. A (SEE TABLE) 8.00 0.30 (0.315 0.012) DIM. B (SEE TABLE) O1.1 4.00 0.10 (0.157 0.004) 2.00 0.05 (0.079 0.002) USER FEED DIRECTION Part Number HSMX-C660 DIM. A 0.10 (0.004) 3.35 DIM. B 0.10 (0.004) 2.30 Figure 10. Tape Dimensions. 6 END START MOUNTED WITH THERE SHALL BE A COMPONENTS MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. THERE SHALL BE A MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. 150 mm-360 mm (5.9 - 14.2 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE. Figure 11. Tape Leader and Trailer Dimensions. Storage Condition: 5 to 30C @ 60% RH max. Baking is required under the condition: a) the blue silica gel indicator becoming white/transparent color b) the pack has been opened for more than 1 week Baking recommended condition: 60 +/- 5C for 20 hours. 7 www.semiconductor.agilent.com Data subject to change. Copyright (c) 2000 Agilent Technologies, Inc. October 19, 2001 Obsoletes 5988-0364EN 5988-4446EN |
Price & Availability of HSMX-C660 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |